USER MANUAL
21
ILDA Control Mode
z
This unit has the ILDA DB25 port, and it can be controlled by the PC, There is
auto transform set in the inside of the unit to transform the ILDA and
preprogrammed show. when connecting by the 25 pin cable, the unit will be
control by PC, when disconnect the unit, it will be preprogrammed program
control
。
z
In the theory, as long as it is ILDA B25
，
It can control this unit, but in the
reality, some of the software can not control this unit, for the 4 pin and the 17
pin of the output card has not connect. In fact this is an easy problem. As
long as you connect them. It can control this unit.
DMX Channels Chart
DMX CHANNEL 1 CHART
CHANNEL
VALUE
DESCRIPTION
CH 1
MODES
000-031
AUTO SHOW 1
（
None Function on other channels
）
032-063
AUTO SHOW 2
（
None Function on other channels
）
064-095
MUSIC SHOW 1
（
None Function on other channels
）
096-127
MUSIC SHOW 2
（
None Function on other channels
）
128-159
Single Pattern Mode
Check
Corresponding Detail
Chart Below.
160-191
Double Patterns Mode
192-
255
WAVE Effect Mode
Several optional operating modes were preprogrammed set into this
laser projector at DMX channel 1. Before control other DMX channels,
please be sure that the channel 1 was set in proper mode (value).
