USER MANUAL
20
Attention When the laser is connected with DMX controlled or under
control by DMX signal, the DMX indicated LED on front
panel is in RED.
SLAVE MODE
z
Press FUNC to enter MODE OPTION
z
Till to SLAVE shown on LCD monitor.
Connect MASTER and SLAVE lasers with DMX cable. The SLAVE lasers are
in SLAVE MODE. Check
XLR Control cable connection
section for your
reference.
z
Press ENTER to confirm the laser to show the present mode at the next
operation.
Scanned World Mirror Setting
z
Press FUNC to enter MODE OPTION
z
Till to MIRROR shown on LCD monitor.
z
Press UP/DOWN to change scanned world mirror.
UP is for Y direction mirror setting and
DOWN is for X direction mirror setting.
z
Press ENTER to confirm the laser to show
the present mode at the next operation.
Attention The X/Y scanned world mirror setting could be done by
both LCD control panel and ILDA setting panel.
Scanned World Testing
z
Press FUNC to enter MODE OPTION
z
Till to TESTING shown on LCD monitor.
z
Turn the ILDA control panel X/Y sizing knob to
change the scanned world size of laser
z
Press ENTER to confirm the laser to show the
present mode at the next operation.
