Laser Show System
10
Mode Option: to set the operating mode.
Confirmation: To confirm and save all setting (operating mode or DMX
address) that you did. At next power on, the laser will do what you
confirm in last time.
To change the DMX address or operation mode.
Press FUNC, the LED panel is flashing to show setting mode. To press FUNC
again enter MODE SETTING. In MODE SETTING, press UP/DOWN to change
value or mode. And then press ENTER to confirm the setting.
CAUTION! Without press ENTER to confirm setting, the system will be
back to last confirmed setting in 10 seconds and never work as you
wanted at next power.
7.1 Preprogramed lasershow mode
7.1.1
SLO
“PUB MODE”
z
Press FUNC to enter MODE OPTION.
z
Till to LED panel shows SLO.
z
Press ENTER to confirm the setting.
The laser is working in
“
PUB MODE
”
, which is pretty slow and soft style show for
music bar and so on.
Summary of Contents for Galaxy 152.737
Page 1: ...152 737 Version 2 0...