Laser Show System
9
12. POWER LED:
indicates that the unit is switched on.
13. MUSIC LED:
flashes to the sound of the music detected by the mic.
14. LASER OUTPUT:
here the laser beam leaves the enclosure, make sure to
never look inside the unit through this opening while the laser effect is
switched on!
15. HANGING BRACKET:
with 2knob on both sides to fasten the unit and a
mounting hole to fix a mounting hook.
16. WARNING LABEL:
Caution-Class 3B laser.
17. WARNING LASEL:
laser aperture.
18. LASER WARNING SIGN:
warns against apotentially dangerous laser when
not used by skilled operators.
19. WARNING LABEL:
laser radiation Avoid exposure to beam. Class 3B laser
product.
6. HOW TO SET UP AND CONTROL THE UNIT
z
Regular breaks during operation are essential to maximize the life of this device
as it is not designed for continual use.
z
Do not switch the unit on and off in short time intervals as this reduces the lamp
life.
z
Always unplug the unit when it is not used for a longer time. Or before replacing
the bulb or star servicing.
z
In the event of serious operating problems, stop using the fixture and contact
your dealer immediately.
z
Important:
Never look directly into the laser beam! Don’t use the effect in the
presence of persons suffering from epilepsy.
7. OPERATION MANUAL
Once the laser is powered on, the LED panel will show the operating mode or
DMX address of this laser, which was set and saved in last time before switching
off. With help of CONTROL PANEL, it could be very easily to set the DMX
address and operating mode of the laser.
Summary of Contents for Galaxy 152.737
Page 1: ...152 737 Version 2 0...