Notes :
Notes :
3.1.5 COPY SCANNER
3.1.5 COPY SCANNER
Example: Copying Scanner 1 into Scanner 2
Action :
Action :
2)
While holding button # 1 press
SCANNER
button # 2.
1
) Press and hold
SCANNER
button # 1.
3)
Release
SCANNER
button # 1 first before releasing
SCANNER
button # 2.
Notes :
Notes :
4)
All
SCANNER
LED indicators will flash to confirm
successful copy.
To save time, you can copy the settings of one
Scanner button to another.
3.1.4 RESETTING THE SYSTEM
3.1.4 RESETTING THE SYSTEM
Action :
Action :
2)
Press and hold BANK UP and AUTO/DEL.
1
)
Turn off the unit.
3)
Turn on power to the unit (while still holding
BANK UP and AUTO/DEL).
Warning:
this will reset the controller to its factory defaults.
This will erase all programs and settings.
Warning:
USER MANUAL
Notes :
Notes :
3)
Move one fader of 1-16 channel to select
the pan channel.
4)
Press the
TAPSYNC DISPLAY
button to
select pan / tilt
5)
Move one fader of 1-16 channel to select
the tilt channel.
6)
press and hold
PROGRAM
&
TAPSYNC DISPLY
buttons to exit and save setting.
All LEDs will blink.
All pan/tilt can be reassigned to output on a
different DMX channel.
3.1.6 FADE TIME ASSIGN
3.1.6 FADE TIME ASSIGN
You can choose whether the board
s fade time during scene execution is implemented broadly to all
output channels or only to the Pan & Tilt movement channels. This is relevant because often you will
want gobos and colors to change quickly while not affecting the movement of the light.
Action :
Action :
2)
Hold the
BLACKOUT
and
TAPSYNC DISPLAY
buttons simultaneously.
1
) Turn OFF the controller.
3)
Turn ON the controller.
Notes :
Notes :
4)
Press the
TAPSYNC DISPLAY
button to toggle
between the two modes. Either all channels (A) or
select channel Pan & Tilt only (P)
5)
Press
BLACKOUT
and
TAPSYNC DISPLAY
to save
settings. All LEDs will blink to confirm.
A: All channels P: Only Pan & Tilt
8/18
DMX 512 CONTROLLER SERIES