User manual – ATLANTIS
151.554UK
3
4.
Caution! To prevent Mortal Electrical Risk and Long Life Operation :
For your safety, please kindly pay attention to all of the warnings listed below:
Always plug in the power plug last and disconnect from the mains, when the device is not in use or
before cleaning.
Do not install and operate the device in rain or extreme heat, moisture or dusty environments.
This device is for indoor use only and in a dry environment.
Do not switch on immediately but wait until it reaches to room temperature, if the device has been
exposed to drastic temperature fluctuations.
Do not shake the device and avoid brute force when installing or operating
Do not spread the smoke or bubble of effect machine directly to the device.
Do not use the device during thunderstorms and please disconnect the power.
Do not use solvents or aggressive detergent to clean the device. Use a soft and clean cloth.
Do not modify the device or the connected power cord without authorization.
Use appropriate safety-rope for safety.
Do not stare to the light.
The symbol
determines the minimum distance from lighted objects. The minimum
distance between light-output and the illuminated surface must be more than 0.1m.
5. Connect with power supply - The ground wire must be connected :
Use the plug to connect to the main power supply as following.
Line
Connection
International signal
Brown
Live
L
Blue
Neutral
N
Yellow /Green
Earth
E
6. Quick Trouble Shooting :
7.1 if the unit is not functional – Check if main power is on and fuse.
7. Replacing Fuse :
Disconnect from the main power supply first, then remove the fuse holder above the IEC Socket to
reveal the fuse. Replace the correct fuse rating as stated on lighting or user guide. Then, lock the fuse
holder cover back into place.
