QIR100H | © 2022 Inim Electronics S.r.l.
5
1.4 Technical specifications
1.3.1 Terminal board
+12V
1
Positive power supply
-12V
2
Negative power supply
ALARM
3 - 4
Alarm signal (N.C. during stand-by)
TAMPER
5 - 6
Tamper signal output terminals (N.C. during stand-by)
1.3.2 LED signallings
Red LED
Alarm signal
Yellow LED
Initialization
1.4 Technical specifications
Power supply voltage
Input voltage
range: from 10 to 16 V
nominal: 12.6 V
Stand-by current draw
11mA @ 12.6V
Maximum current draw
13mA @ 12.6V
Detectors type
digital dual PIR
Detection mode
Infrared emission
Alarm pulses
from 1 to 2
Intrusion alarm output
N.C., 16V
, 100 mA max
Tamper output
N.C., 16V
, 100 mA max
Signal minimum duration
1 o 3 seconds
Detection range (max)
15 m
Detection angle
90°
Security grade
2
Environmental class
II
Installation method
wall-mounting
Installation height
2.2m
Dimensions (HxWxD)
96 x 60 x 44 mm
Weight
62 g
Environmental operating conditions
Temperature
from -10 to +40 °C
Relative humidity
≤93% without condensation
