QTech SMS Lite
– Quick Start Guide V1.5
10
www.qtech.co.nz
Ph: +64 3 366 3713
Page 10 of 21
Supply Voltage Alarm
If the SMS Lite is connected to an external battery or the mains, and the supply voltage
drops below 10.5V, Ph1 will receive a notification message:
The supply voltage at <site> has gone low.
When the voltage increases above 11.5 volts a Supply Voltage message will sent:
The supply voltage at <site> has returned to normal.
Note
–
Supply Voltage alarms do not escalate like input alarms. Supply voltage
can be queried at any time using the STATUS command.
