8
Step 10 – Reinstall the ECU
Replace the ECU at the back of the chair and replace the two screws using a 5mm Allen key
Step 11 – Re-secure the seat
Re-secure the seat back down onto the battery tray. Refer to the inverse order of steps 1 and 2.
Step 12 - QLK Alignment
Alignment between the wheelchair bracket and the QLK must be checked and adjusted before bolting the QLK to the
vehicle floor.
The chair must be ballasted to the intended occupant weight to ensure the chair is at the correct height.
On a flat surface, measure the ground clearance between the floor and the lowest point of the bracket.