23
TROUBLESHOOTING
IMAGE
ANSWER
It's an Emergency
and Occupant Securement is
locked down and it’s not
releasing the wheelchair
occupant.
PROBLEM
Detach Pelvic Belt Pin Connector from
Retractor Pin or cut the Pelvic Belt webbing
at an angle. (Use Q'Straint®
Emergency Cutter)
It's an Emergency
and retractors are locked down
and not releasing the J-Hooks.
Press Reset Button and push Thumb
Controller downward. If Retractors do not
release the J-Hooks, cut webbings at an
angle (Use Q'Straint® Emergency Cutter).
OR
Cut Webbing
OR
It's an Emergency
and there is no power
It's an Emergency
Unable to lock INQLINE
SECUREMENT retractors in place
while pressing and holding the
lock button on the wall
control panel
Cut Webbing
Cut webbings at an angle (Use Q'Straint®
Emergency Cutter).
Press & hold Z button; pull
thumb controller downward allowing
wheelchair to move back 1 to 2 inches,
stop and reattempt to lock retractors.
