English
……………………………………………………………………………………………………………………………………………………………………………………….
.........................................................................................................................................................................................
2
www.Qstarz.com
C. Battery installation
C-1 Put Battery in place:
Press the
PUSH
button on the bottom side
of the unit (1) and pull out the battery cover. Insert battery in the
unit (2) and put battery cover on to the cabinet (3), then push down
and force it forward to fit firmly (4).
C-2 Take Battery out:
Press the
PUSH
button on the bottom side of
the unit (1) and pull out the battery cover (2). Then take out the
battery from the unit (3).
D. Charging your battery
For the first time using the
BT-Q818XT, please charge battery
until it is fully charged. Take the
power cable and connect it to the
power jack (mini USB type) and
recharge through travel charger or
car cigarette adaptor. This will begin to charge the battery. Charging
time is 3 hour typically.
- When the Power LED is Red, battery power is low status. Please
recharge.
- When the Power LED is Green, the battery is under charging mode.
- When the Power LED is off, the battery is fully charged.
*Charge Input Voltage: DC 5V
Caution:
Risk of explosion if Battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
２
４
