SC-4000
:
Operating Instructions
8
Quality Stainless Products
PNEUMATIC SCHEMATIC
STRUT ASSEMBLY LIMITATIONS
The following parameters outline the most common spring dimensions that the strut compressor will accept.
CYLINDER STROKE (spring compression)………………………………………………….……9 7/8”
FINGER STROKE (clamp adjustment with knob)………………………………………….……..2 5/8”
MAXIMUM DISTANCE BETWEEN UPPER & LOWER CLAMPS……………………….……12 1/2"
MAXIMUM SPRING DIAMETER……………………………………………………………..…Ø11 1/2"
MINIMUM SPRING DIAMETER…………………………………………………………….……Ø3 1/2"
MAXIMUM COIL DIAMETER (spring wire)……………………………………………………...Ø1 1/2"
MINIMUM DISTANCE BETWEEN SPRING COILS………………………………………………..7/8”
