104
105
4.7 ADVANCED
In this set of commands, the user can erase all the settings, import or export data files to
and from the DVR and control who can remotely access the DVR through three submenus:
Reset
,
Import/Export
and
Black/White List.
PICTURE 4-30
PICTURE 4-32
RESET
Clicking on this option will open a warning
dialogue asking you to confirm that you wish
to remove all settings and reboot the system.
You must select
OK
to continue with the reset
or hit
CANCEL
to exit without changes.
BLOCK/ALLOW LIST
From here, an authorized user can control which computer users are allowed to access the
DVR.
The
Block List
is used to deny access to remote computers within a certain IP address
segment.
The
Allow List
is used to permit access by users from select IP address segments.
EXAMPLE:
You wish to block access to the DVR from computer users within the IP address
segment ranging from 196.168.000.002 to 196.168.000.004. Select the
Block
button and
then enter the first segment in the
IP From
field and the last address within the segment in
the
To
field. You may add additional segments before hitting
Apply
to save your settings and
then exiting this window.
IMPORT/EXPORT
Use this interface to export select data files
to mobile Flash drives or an external USB
drive through the backup function. Specific
data files can also be retrieved from mobile
or external storage devices and recorded
onto the DVR.
PICTURE 4-31
4.8 FILE SEARCH, PLAYBACK AND MANAGEMENT
Access the recordings on the DVR, play them back and backup the recordings to an external
storage device.
NOTE!
Throughout this window, if the screen resolution is VGA 800*600,
the time search interface will show a
Hide
button. Clicking on this button will
expand or minimize the entire interface as needed.
Four submenus appear in this section:
Time
Search
,
Event Search
,
File Management
and
Image
.
TIME SEARCH
Search for an event within a range of dates and times.
PICTURE 4-33
PICTURE 4-34
Select which channel you wish to search and the screen display mode. The
Calendar
icon in
the
Start Time
window allows you to select a start date. Highlighted dates indicate that there
is recorded data for those days.
The vertical column of numbers to the left of the grid are the available channels. The horizontal
headings are blocks of time within the day.
You can select which time to begin the review by entering it in the start time window or clicking
on the time grid and moving the yellow line to the approximate start time.
Clicking on the
PLAY
button will begin the playback from the time selected. It will also bring up
a playback toolbar allowing finer control of the playback process.
Previous
Record
Play/
Pause
Stop
Fast
Forward
Rewind
Screen Display
Mode
Volume
Hide
Tool Bar
Exit
Frame
Advance
Next
Record
Playback
Progress Bar
Zoom Color Trim Backup
Playback
Speed
>>1 X
08/19/2011 12:02:00
PICTURE 4-35
