10
WL2102-w
Configuration
Bi-amp or tri-amp mode
Transducers
Low-frequency
High-frequency
2 x 400 W, 16
Ω
10" woofer, 3" voice coil, ceramic magnet assembly
1.4" exit, 3" titanium diaphragm, neodymium magnet assembly
Frequency Response (±3 dB)
1
55 Hz – 18 kHz (with recommended DSP processing)
Frequency Range (-10 dB)
48 Hz – 20 kHz (with recommended DSP processing)
Nominal Impedance
HF: 16
Ω
LF bi-amp mode: 8
Ω
LF tri-amp mode: 16
Ω
(x 2)
Continuous Power Capacity /
Recommended Power
HF: 80 W / 300 W (2 hours, AES1984-2 method, 1 – 10 kHz)
LF bi-amp mode: 600 W / 1400 W (2 hours, AES1984-2 method, 80 – 800 Hz)
LF tri-amp mode: 400 W / 700 W (x 2) (2 hours, AES1984-2 method, 80 – 800 Hz)
Sensitivity (1 W at 1 m)
HF: 107.5 dB (single cabinet measured in free space)
LF: 98 dB (single cabinet measured in free space. LF drivers connected in parallel)
Maximum Output
Continuous / Peak (SPL at 1 m)
HF: 127 dB / 133 dB
LF: 127 dB / 133 dB
Nominal Coverage
H: 140°
V: dependent on number of elements used
Cabinet Type
Ported / trapezoidal
Enclosure Material
Baltic birch plywood
Finish
Black or white texture coat
Grille
Perforated, formed powder coated steel
Connectors
2 x Neutrik Speakon
®
NL8 in parallel
Pin Outs
Pins
Bi-Amp
Tri-Amp
1+/1-
LF
MF
2+/2-
NC
LF
3+/3-
NC
NC
4+/4-
HF
HF
Attachment Points
Integral, adjustable rigging system, vertical splay adjustable in 1° increments from 0° – 10°
Weight (Net / Shipping)
83 lb (37.7 kg) / 91 lb (41.4 kg)
Dimensions (HWD)
10.8" x 27.4" x 20.75" (274 mm x 696 mm x 527 mm)
Available Accessories
AF2102-LA
Frame used for suspending or stacking applications. Frame weight 37 lb/16.8 kg.
Software
EASE Focus line array modeling software tool available; visit www.qsc.com or contact QSC’s Technical Services for DSP tunings
Ball-lock Pins
WL2102-w
AF2102-LA
7" Stainless steel lanyard 5/16" D x 0.75" W, t-handle: p-n HW-000106-00 (Rear link pin)
5" Stainless steel lanyard 5/16" D x 0.75" W, t-handle: p-n HW-000126-00 (Front link pin)
4" Stainless steel lanyard 5/16" D x 1.25" W, Round head HW-000162-00 (Rear link pin)
1) With recommended DSP settings
Specifications subject to change without notice.
Specifications
