6
TD-000508 -01 -A
Installation
The Q-Sys TSC-7t is designed to be mounted on a table, or desk.
General Requirements
The TSC-7t
• Must have access to the Q-LAN Ethernet.
• Must be mounted with suffi cient space for adequate ventilation.
• Mounting surface Thickness:
• Maximum – 4” (102 mm),
• Minimum – Not specifi ed
Power Source
• PoE (Power over Ethernet – IEEE 802.3af class 3 device) LAN A only
• 12V DC AUX Power source (not supplied)
◦
12V DC @ 1A (12W)
◦
Barrel connector:
»
Negative contact – 5.5mm +/- 0.2mm
»
Positive contact – 2.5mm +/- 0.2mm
»
Length - 9.5mm +/- 0.3mm
Installation Confi guration
Select one of the following:
1. Through the Table Mounting (
Figure 3
)
a. TSC-7t
b. Mounting Surface (table, desk...)
c. Mounting Pipe - 31.6 mm (1.25 in), Nut and Washer
d. TSC-7t Cables - through the table
2. Free Standing (
Figure 4
)
a. TSC-7t
b. Mounting Surface (table, desk...)
c. TSC-7t Cables - over the table
Prepare for Installation (both options)
Refer to
Figure 5
1. Remove the TSC-7t from the box.
2. Remove 4 screws (1) from the bottom of the assembly. Save for later use.
3. Remove the Base (2).
NOTE:
If the Cable Cover (3) falls off during disassembly, be sure to replace it
before re-installing the Base (2).
— Figure 3 —
a
b
c
d
— Figure 4 —
a
b
c
— Figure 5 —
1
2
3
