™
Quick Start Guide
Tabletop Stand Accessory
TSC-50t-G3 (for TSC-50-G3)
TSC-710t-G3 (for TSC-70-G3 or TSC-101-G3)
Warr
anty
For a copy of the QSC Limited W
arrant
y, visit the QSC, LL
C., website at www.qsc.com.
Tabletop F
eatures
• Tool-less assembly
• P
ortrait and landscape
configurations
• Movable or fixed installation
options
• Non-skid, low pr
ofile
design
Specifications
• Dimensioned dr
awings and product specifications available online at www
.qsc.com.
• QSC r
ecommends using a category cable without a moulded str
ain relief boot. R
efer to the
Hardwar
e User Manual for other cable requir
ements.
Yes
No
Movable In
stallation TSC-50t-G3 / T
SC-710t-G3
Caution:
Do not attempt to assemble or disassemble the stand while the touch
screen contr
oller is attached.
1
Orient Docking Plate
1
(TSC-50t-G3 Only)
4
Install Base
5
Connect Cable to
6
Touchscr
een Controller
2
Remove Base
2
(Method 1)
3
Route Cable
(Method 2)
®
QSC Self Help Portal
Read knowledge base articles and discussions, download software and firmware,
view product documents and training videos, and create support cases.
https://qscprod.force.com/selfhelpportal/s/
Customer Support
Refer to the Contact Us page on the QSC website for Technical Support and
Customer Care, including their phone numbers and hours of operation.
https://www.qsc.com/contact-us/
© 2021 QSC, LLC. All rights reserved. QSC, the QSC logo, Q-SYS, and the Q-SYS logo are registered trademarks of
QSC, LLC, in the U.S. Patent and Trademark office and other countries. Q-LAN and Q-SYS Designer are trademarks of
QSC, LLC. Patents may apply or be pending.
All other trademarks are the property of their respective owners.
http://patents.qsc.com
TSC-50t-G3
Fixed Installation
Movable Installation
TSC-710t-G3
Landscape
(Default)
Rotate CW 90°
(Por
trait)
TD-001620-01-A
*TD-001620-01*
3
2
