7
TD-001543-01-C
Features
Front Panel
Rear Panel
— Figure 1 —
1
2
3
1.
Power LED
– illuminates blue when the
Q-SYS NV-32-H (Core Capable) is powered on
2.
ID LED
– LED blinks when placed into ID Mode via ID Button or
Q-SYS Core Manager/Peripheral Manager Software
3.
ID Button
– Locates the Q-SYS NV-32-H (Core Capable) in
Q-SYS Designer GUI and by Q-SYS Core Manager/Peripheral
Manager
— Figure 2 —
1
2
3
5
7
9
10
4
8
12
11
6
1.
External Power Input 48 VDC 1.5 A
– Auxiliary
power, 48 VDC, 1.5A, 2-pin Euro connector
2.
LAN A/ PoE ++
– connection for Q-LAN network, 802.3bt
Type 4 power, RJ-45 connector
3.
LAN B
– RJ-45 connector, not active in peripheral mode. In Core
Mode, LAN B supports redundancy, VOIP, Control etc.
4.
USB Type A
– USB type A host connectors (blue connector
is for USB 3.0 connection). 1.0 A, total, is available for all four
Type-A USBs.
5.
GPIO Out
•
12 VDC Output
– 12 V, 0.2 A output used for GPIO
signals.
•
GPIO Outputs
– 3 outputs, open collector (24 V, 0.2 A
maximum) with pull up to +3.3 V, pins 1-3 equal pins 1-3 in the
Q-SYS Designer GPIO Output component.
•
Ground
– Use this ground reference for 12 VDC and GPIO
outputs.
6.
GPIO Inputs / RS-232
•
GPIO Inputs
– 2 inputs, 0-24 V analog input, or contact
closure, pins 1-2 equal pins 1-2 in the Q-SYS Designer GPIO
Input component.
•
RS-232
– Transmit and Receive
•
Ground
– Use this ground reference for GPIO inputs and
RS-232.
7.
Analog Audio Output
– 3.5 mm connector unbalanced
stereo line output
8.
Analog Audio Input
– 3.5 mm connector unbalanced
stereo mic/line input
9.
USB B
– USB Type B Device connector for web conference
integration
10.
HDMI Inputs
– HDMI 2.0 Input with support for HDCP 2.2 and
HDCP 1.4
11.
HDMI Outputs
– HDMI 2.0 Output with support for HDCP 2.2
and HDCP 1.4
12.
Factory Reset
– Use a paper clip, or similar tool, to press
and hold the reset button for 10 seconds to reset the NV-32-H to
factory values.
