QSC Q-SYS NV-32-H, Hardware User Manual

Page: 3 / 10

3
TD-001543-01-C
Introduction
The Q-SYS NV-32-H (Core Capable) can operate in two modes.
In peripheral mode, the device functions as a network video endpoint native to the Q-SYS Ecosystem, serving as a multi-stream configurable HDMI
encoder or decoder enabling network based video distribution. The endpoint uses Q-SYS Shift, which delivers the right balance of high quality
(supporting resolutions up to 4K60 4:4:4), low latency and network efficient distribution across a standard gigabit infrastructure.
In Core Mode, the device functions as a Q-SYS Core Audio and Control processor with an integrated HDMI video switch. In this mode users can run
the product as they would any other Core, but will not be able to encode or decode streams.
Powering the Q-SYS NV-32-H (Core Capable)
WARNRNG!:
To avoid risk of electric shock, this equipment must only be connected to a supply mains
with protective earth when using class I power supply.
The Q-SYS NV-32-H (Core Capable) has a flexible power solution that allows the integrator to choose to use either a 48 VDC power supply
or a 802.3bt type 4 PoE++ injector. Please note that 802.3bt type 4 is a high-power over Ethernet standard that allows for up to 71W of
power delivered to end-point devices over standard Ethernet cabling. Equipment meeting the 802.3bt type 4 standard is required to power the
Q-SYS NV-32-H (Core Capable). The Q-SYS NV-32-H (Core Capable) will not work using PoE or PoE+ (802.3af or 802.3at) equipment.
With either power solution please make sure to follow the safety instructions for the specific power supply or injector chosen. For details on the
48 VDC or PoE++ power supply requirements please see the product specifications at the end of this document.
Installation
Ventilation
Minimum open space of 6 inches measured from the back of the
Q-SYS NV-32-H (Core Capable).
RNOT!:
In order to provide adequate dissipation of
heat, keep the space directly to the rear of the
Q-SYS NV-32-H (Core Capable)
free of obstacles.
Select the Installation Configuration
Choose one of the following configuration options:
A.
One Q-SYS NV-32-H (Core Capable) 19-inch Rack (Left
or Right Mount)
B. One Q-SYS NV-32-H (Core Capable) 19-inch Rack
(Center Mount)
C. Two Q-SYS NV-32-H (Core Capable)'s 19-inch Rack
D. One Q-SYS NV-32-H (Core Capable) Half Rack
E.
Under Table or on Wall