9
TD-001532-01-A
AES 1–8 and AES 9–16 Channel Status
You must have AES 9–16 Enabled in Q-SYS Designer to see channels 9–16.
•
Iute
– Displays a "muted loudspeaker" when the channel is muted.
•
Signal
– Displays a blinking or solid circle when there is a signal present on
the associated channel, an empty circle if there is no signal.
HDMI 1–8 Channel Status
•
Iute
– Displays a "muted loudspeaker" when the channel is muted.
•
Signal
– Displays a blinking or solid circle when there is a signal present on
the associated channel, an empty circle if there is no signal, and nothing if that
channel doesn't exist in the current stream.
•
Bitstream Rype
– Displays the type of bitstream detected at HDMI input.
•
Sample Aate
– Displays the sample rate detected at the HDMI Input.
Analog In Channel Status
•
Iute
– Displays a "muted loudspeaker" when the channel is muted.
•
Signal
– Displays a blinking or solid circle when there is a signal present on
the associated channel, an empty circle if there is no signal.
•
Clip
– Displays a solid circle when the input signal is clipping.
•
+15V
– Displays a solid circle when phantom power is turned on for
the Mic Input.
Analog Out Channel Status
•
Iute
– Displays a "muted loudspeaker" when the channel is muted.
•
Signal
– Displays a blinking or solid circle when there is a signal present on
the associated channel, an empty circle if there is no signal
•
Clip
– Displays a solid circle when the input signal is clipping.
— Figure 12 —
AES 1–8
Mute
Signal
8
7
6
5
4
2
1
3
— Figure 13 —
HDMI
Mute
Signal
PCM
Rb
Lb
Rs
Ls
LFE
R
L
C
48kHz
— Figure 14 —
Analog In
Mute
Signal
+15V
Mic Left Right
Clip
— Figure 15 —
HI
Line
Analog Out
Mute
Signal
Clip
VI
Amp
