QSC Q-SYS Core 1000, User Manual

Page: 16 / 17

16
Mic/Line Input
CIML4
High-Performance
Mic/Line Input
CIML4-HP
Line Output
COL4
DataPort Output
CODP4
AES-3
Input/Output
CAES4
User-configurable Options (software enabled)
Phantom Power +48 V phantom power
(meets IEC 1938
[1996] spec) +48 V phantom power
(meets IEC 1938
[1996] spec) — — —
Output Trim
Vrms (max)
dBu (max)
dBv (max)
—
—
— —
—
— 8.7 V
21 dBu
18.8 dBv —
—
— —
—
—
Amplifier Standby — — — Set or clear amplifier in
standby mode —
Mute — — — Set or clear individual
channel mutes —
Enable Meters — — — Enable data collection of
meters for each channel —
Audio Output Levels — — — Adjust individual audio
channel levels —
Amplifier Model Support — — — CX, PowerLight™ 3
Series, DCA, and legacy
V1 models —
4 Group Delay assumes that the sample rate converter is enabled.
CobraNet I/O Card
CobraNet Input/Output CCN32
Description Up to 32 input and 32 output channels of CobraNet
digital audio
Performance
Dynamic Range A-weighted > 138 dB
Frequency Response 20 Hz – 20 kHz ± 0.2 dB
THD+N -130 dB (typ)
Group Delay Selectable:
modeRate = 0x400: 1.479 ms (2.812 ms w/SRC enabled)
modeRate = 0x500: 2.813 ms (4.146 ms w/SRC enabled)
modeRate = 0x600: 5.479 ms (6.812 ms w/SRC enabled)
I/O Capacity Selectable:
4 x 4
8 x 8
16 x 16
32 x 32 (Core only)
Bundle Packing 0 to 8 channels
CobraNet Network Transmitters 4
CobraNet Network Receivers 4
Configuration Management Simple Network Management Protocol v1
Mute Infinite attenuation (via digital mute)
Connectors Two RJ-45 jacks
NOTE!: Specifications subject to change without notice.