20
TD-000351-00-E
ES
Asistente para definir preajustes (Preset Wizard)
El asistente para definir preajustes (Preset Wizard) simplifica el proceso de creación de preajustes, y le permite crear un preajuste sin utilizar otro como modelo.
El asistente para definir preajustes proporciona un mecanismo mediante el cual es posible seleccionar la potencia y carga deseadas. Basándose en estas selecciones,
se selecciona la mejor configuración del amplificador y a continuación se le permite seleccionar y asignar altavoces en cada salida.
HOME > PRESETS > PRESET WIZARD > ENTER (INICIO > PREAJUSTES > ASISTENTE PARA DEFINIR PREAJUSTES > INTRO)
PASO 1 —
Acerca del PRESET WIZARD (Asistente para definir preajustes)
ABOUT
SPEAKERS
SAVE
Preset Wizard does the following:
• Configures the amplifier
• Loads DSP settings for assigned speakers
Tips:
• Start with the highest power
• Speakers do not need to be assigned
to each output
NEXT
El asistente de preajustes realiza lo siguiente:
• Configura el amplificador
• Carga ajustes de DSP para los altavoces asignados
Recomendaciones:
• Empiece por la mayor cantidad de potencia
• Los altavoces no necesitan asignarse a cada salida
Para continuar, pulse
ENTER
PASO 2 —
Ajuste de la impedancia y la potencia
OUTPUTS
SPEAKERS
SAVE
A
B
C
D
Output:
8.0
- -
- -
- -
Imped:
625
- -
- -
- -
Power:
Remaining Power Available: 1875 W
Enter Load Profile (Impedance and Power)
Ajuste la impedancia
en base a la carga total de
altavoces conectada al canal.
Valor predeterminado = 8
Ω
Valor predeterminado = mín. para el amp
La impedancia y la potencia están enlazadas
dinámicamente para los ajustes.
Desplácese para seleccionar (impedancia o potencia)
Para editar, pulse
Gire para ajustar el parámetro
Para confirmar, pulse
Repita para los canales de
salida restantes
ENTER
ENTER
HOME > PRESETS > PRESET WIZARD > ENTER > (ENTER) (INICIO > PREAJUSTES > ASISTENTE PARA DEFINIR PREAJUSTES > INTRO > [INTRO])
— Figura 15 —
- - -
B
25%
A
- - -
25%
D
- - -
25%
C
- - -
25%
AB
- - -
50%
D
- - -
25%
C
- - -
25%
CD
- - -
50%
AB
- - -
50%
A+B
- - -
50%
D
- - -
25%
C
- - -
25%
D
- - -
25%
ABC
- - -
75%
ABCD
- - -
100%
AB + CD
- - -
100%
A+B
- - -
50%
C+D
- - -
50%
*
Posibles combinaciones del modo de salida utilizando el asistente para definir preajustes
Modos: A B = Canales separados / A+B = Modo puenteado (Bridge) / AB = Modo paralelo
*Los porcentajes se utilizan para representar la potencia para diferentes modelos de amplificador.
PASO 3 —
Seleccionar el canal de salida para la asignación de altavoces
OUTPUTS
SPEAKERS
SAVE
Assign
Assign
Assign
Output:
A
D
C
B
Imped:
8.0
8.0
8.0
8.0
Spkr:
- - - -
- - - -
- - - -
- - - -
Assign
Power:
625
625
625
625
Cuando haya terminado de
establecer la impedancia y la
potencia para cada salida, continúe
desplazándose hacia abajo para
acceder a la pestaña SPEAKERS
(ALTAVOCES).
La asignación de altavoces es
opcional; puede asignar un altavoz
a uno o más canales, o ninguno en
absoluto.
Desplácese para seleccionar el canal de salida.
Para asignar un altavoz, pulse
Continúe con el paso siguiente.
ENTER