35
Attaching Loudspeakers for an Array
1. Set the Locking Levers on the upper loudspeaker to the middle (ADD+) position on both sides.
2. Hang both Front Strikes of the lower loudspeaker onto the Front Hooks of the upper loudspeaker.
3. Lift rear handles of the lower loudspeaker until the Angle Bar connects to the Rear Hooks of the upper loudspeaker on both sides,
making a click sound.
4. Push the Locking Levers down (LOCK) on both sides of the upper loudspeaker.
5. Repeat steps 1-4, until array is complete.
IMPORTANT:
When rigging loudspeakers together or to the Array Frame, attach the bottom unit to the one above using
the QSC RapidDeploy latching mechanism on the upper unit.
— Figure 55 —
WARNING!:
Make sure the loudspeakers are physically, properly aligned; if not, the latching system may not properly
engage, and the loudspeakers could separate causing physical damage, and/or personal injury.
Detaching Loudspeakers from an Array
1. Support the weight of the lower loudspeaker and push the Locking Levers up (REMOVE) on both sides of the upper loudspeaker.
2. Lower the loudspeaker carefully using the rear handles. The loudspeaker remains suspended on the Front Strikes of the upper
loudspeaker.
3. Lift the lower loudspeaker off the Front Hooks of the upper loudspeaker to fully detach.
4. Push the Locking Lever down (LOCK) on the upper loudspeaker.
— Figure 56 —