QSC DPM 100 User Manual Download Page 8

8

 TD-000515-01-D

Specifications

Parameter

Specification

Front Panel Controls and Indicators

Monitor Volume/parameter 
adjust

Rotary encoder

Setup mode indicator

Yellow LED

LCD

128 x 64 bit Monochrome LCD

Master Mute indicator

Red LED

Master Mute

Push button

Master Volume

Rotary encoder

Power on indicator

Green LED

Fault detect indicator

Yellow LED

USB Type B port

Config and management interface

Monitor output

3.5 mm TRS

Rear Panel Connectors

Network RJ45

10/100 Mbps network management

Automation Inputs

RJ45 – 6 contact closure inputs

RS232

DB-9 Serial Interface

Channels 1-8 AES3/EBU 
Inputs

RJ45 

Channels 15-16 AES3/EBU 
Inputs

RJ45

S/PDIF Input

RCA — Stereo digital audio interface and Lt/
Rt Matrix

Analog Inputs (1-8)

DB-25

Line Inputs

3.5 mm TRS — Stereo Left and Right and Lt/
Rt Matrix

Mic/Line input

XLR — Mic  +15V phantom power or line level

HDMI input/output

Type A female connectors

DataPort connectors

HD-15 (9 or 11) — QSC amplifier interface

H.I./V.I. output

5-pin Euro-style (x1) – common GND

Relay outputs

3-pin Euro-style (x2) – max 30 VDC

Power switch

Rocker switch

Monitor Speaker

Speaker

2”x 3.5" full-range

Impedance

Ω

Amplifier output power

10 watts Class D

Frequency response

20 Hz – 20 kHz (± 2 dB)

Analog Inputs/Outputs

General Audio Performance Requirements

A/D conversion

24-bit delta-sigma, 48 kHz

Frequency response: 

20 Hz to 20 kHz (+- .5dB)

Main Analog Input (DB25F - 8 channel)

Active balanced input

Input impedance: 

20k Ohm

Max analog input level:

 +14.2 dBu (4.0 Vrms)

Dynamic range 
(unweighted): 

 > 106 dB

Dynamic range 
(A-weighted):  

> 108 dB

THD+N at 2 dB below clip:

< 0.003%

Parameter

Specification

Mic/Line Input (XLR)

Active balanced input

Input impedance: 

2.2k Ohms

Max analog input level: 

26 dBu

Dynamic range 
(unweighted): 

> 106 dB

Dynamic range 
(A-weighted): 

> 108 dB

THD+N at 10 dB below clip 
(26dBu sens):  

< 0.02%

THD+N at 10 dB below clip 
(21dBu sens):  

< 0.003%

Input gain

0 to 60dB in 1 dB steps

CMRR typical 20 Hz – 20 
kHz:

>  50dB

EIN: 

< -122 dB

Phantom power voltage:  

15V

Stereo Line Inputs (3.5mm minijack)

Unbalanced input

Input impedance (4dBu 
sens):  

> 10k Ohms

Max analog input level  
(4dBu sens):

14 dBu (4.2 Vrms)

Input impedance (-10dBV 
sens):  

2.7k Ohms

Max analog input level  
(-10dBV sens): 

0 dBV (1 Vrms)

Headroom (all sens):  

> 10dB

Dynamic range 
(unweighted):  

> 106 dB

Dynamic range 
(A-weighted):  

> 108 dB

THD+N at 2 dB below clip:  

< 0.003%

DataPort Outputs (HD15)

Max output level: 

14 dBu

Dynamic range 
(unweighted): 

> 109 dB

THD+N at 2dB below clip:  

<.002 %

HI/VI Outputs (5-pin Turo-style with common G D)

Balanced output
Max output level: 

18 dBu (adjustable)

Dynamic range 
(unweighted): 

> 109 dB

THD+N at 2dB below clip: 

<.002 %

Monitor Headphone Output (Front Panel  3.5mm minijack)

Unbalanced output
Max output level: 

21 dBu

Dynamic range 
(unweighted): 

> 109 dB

THD+N at 2dB below clip: 

<.025 %

Summary of Contents for DPM 100










Reviews: