15
TD-001585-01-B
CHANNEL CONFIGURATION Screens
1.
is a graphic representation of the amplifier's output CHANNEL
CONFIGURATION. Inputs (Q) are from Q-SYS, outputs A–D (E–H not shown) represent
the amplifier output channels and their configuration.
2. Text indicating how many channels, and the output configuration. For possible
configurations refer to
"Possible Combinations" on page 9
or, the Q-SYS help for
the amplifier components.
3. Status of the amplifier and Q-SYS design indicating the design and amp are in sync.
ROUTABLE MIC/LINE INPUTS
This screen is not available on the
DPA-Q
n
model amplifiers.
shows the Routable MIC/LINE INPUTS screen for channels 1–4, (channels 5–8 not
shown) which displays the status of the physical MIC/LINE INPUTS for the Q models.
1. Input channels are identified numerically, 1–4 (and 5–8 not shown)
2.
Input Level
– is the Peak Input Level (dBFS) and is the same as displayed in the Q-SYS
Mic/Line Input component.
3.
Muted
– when illuminated indicates that the Input is muted for the associated channel.
This is controlled by the Mute button on the Q-SYS Designer Mic/Line Input component.
Input channels cannot be muted from the amplifier interface.
4.
Clip
– indicators illuminate when the input to the Mic/Line Input component is too high.
Adjust the Preamp Gain on the Mic/Line Input component in Q-SYS Designer.
5.
P12
– phantom power (+12V) is available for microphones (condenser) requiring power. You
can turn the phantom power on/off in the Mic/Line Input component in Q-SYS Designer.
— Figure 21 —
4 Channels: E F G H
Channel Configuration Locked to Design
Q E
Q F
Q G
Q H
CHANNEL CONFIGURATION
4 Channels: A B C D
Channel Configuration Locked to Design
Q A
Q B
Q C
Q D
CHANNEL CONFIGURATION
1
2
3
1
2
3
— Figure 22 —
ROUTABLE MIC/LINE INPUTS
INPUT LEVEL
MUTED
CLIP
P12
1
2
3
4
dB
dB
dB
dB
2
3
4
5
1
