39
5.
If you accidentally leave the quick install page, you can always return to the setup page
by go through the steps above from step 1 again.
6.
After quick setup is finished, login to the QSM as “
admin”
(default account name) with
the password you set on former instructions.
INFORMATION:
1. The XCubeNAS must be connected to the Internet to install QSM with
Web Finder.
2. Both the XCubeNAS and your PC must be on the same local network.
3. If you cannot find your XCubeNAS, the default IP address for LAN 1 is
169.254.1.234.
4. If you expanded your memory or add a network expansion card earlier
on, you can now check to make sure the system recognizes the new
module. You can check the status by following steps:
a.
Login to QSM as
admin
or a user belongs to the
administrator
’s
group.
b.
Find the memory status in
Monitor app
→
Hardware
.
If your system cannot recognize the expanded memory or the network
expansion card or failed to start up, please check again and ensure the
unit is properly installed.
