Data Backup
277
Figure 12-43 Remote Replication Target Controller Fail Diagram
Add Multipath in Remote Replication Task
Here’s an example of adding the second path in the remote replication. Assume that we
define the IP addresses in the example.
Site A Source Unit Configuration:
Controller 1, Onboard LAN 1 IP Address: 10.10.1.1
Controller 1, Onboard LAN 2 IP Address: 10.10.1.2
Controller 2, Onboard LAN 1 IP Address: 10.10.1.3
Controller 2, Onboard LAN 2 IP Address: 10.10.1.4
Source Volume Name: Source-Vol-1
Site B Target Unit Configuration:
Controller 1, Onboard LAN 1 IP Address: 10.10.1.101
Controller 1, Onboard LAN 2 IP Address: 10.10.1.102
Controller 2, Onboard LAN 1 IP Address: 10.10.1.103
Controller 2, Onboard LAN 2 IP Address: 10.10.1.104
Target Volume: Name: Target-Vol-2
Operate web UI of Site A source unit:
1.
Select the
Remote Replications
function submenu, select the task, and then click
▼
->
Add Multipath
.
Summary of Contents for XCubeSAN XS5224D
