52 ©
Copyright 2019 QSAN Technology, Inc. All Right Reserved.
Confirm the Cache-to-Flash Module Installation
After the cache-to-flash modules are installed, you can check the status and information
about cache-to-flash module in the SANOS UI ->
SYSTEM SETTINGS
->
Power
->
Cache to
Flash
. If the flash module and power module are properly installed, the status will display
Good
.
Figure 3-22
Status and Information of Cache-to-Flash Module
3.6.
Installing the Optional Slide Rails
If you did not purchase QSAN qualified slide rails, please skip this section. The table below
shows the available slide rail, model name, and its description.
Table 3-13
Available Slide Rails for XCubeSAN Series
Model Name
Picture
Description
Applied Models
SLR-RM3640
Slide Rail
XS5200 Series
XS3200 Series
XS1200 Series
INFORMATION:
Slide rails is an optional part of all XCubeSAN series models, if you did not
purchase QSAN qualified slide rails, you can skip the fourth step of the
system installation tasks. If you want to purchase QSAN qualified slide
rails: full extension and thin slide with tool-less bracket: AA612508 series,
please contact QSAN authorized reseller.
