17
3.
Insert a new memory module into the slot.
①
Push the retaining clips on the slot out to the sides.
②
Align the notch on the gold edge of the module with the notch in the memory slot.
③
Push down on the memory module with firm and even pressure. The retaining clips
will snap into position as the module is correctly inserted.
4.
Put back the rear top cover you lifted in step 2.
①
Align the pin at the side of the rear top cove
r with the slots on the chassis’ edge, and
push the rear top cover back in position.
②
Put back and fasten the screw on the back of the XCubeNAS.
