background image

    

 

Warranty and Limitation of Liability 

QSA Global, Inc. (herein referred to as the manufacturer) warrants its product which it manufactures 

and sells to be free from defects in material and workmanship for a period of one year from the date of 

shipment. This warranty shall not apply to any product or parts which have been subjected to misuse, 

improper installation, repair, alteration, neglect, accident, abnormal conditions of operation, or use in 

any manner contrary to instructions. 

The manufacturer's liability under such warranty shall be limited to replacing or repairing, at its option, 

any parts found to be defective in such respects, which are returned to the manufacturer, 

transportation prepaid; or at its option, to returning the purchase price thereof. 

The warranty on other manufacturer's components shall be that of the original manufacturer whose 

warranty shall be binding. 

In no event shall the manufacturer be liable for any incidental or consequential damages, whether or 

not such damages are alleged to have resulted from the use of such product in accordance with 

instructions given by or referred to by the manufacturer. 

QSA Global, Inc. assumes no liability or responsibility for the usage of any radioactive material or device 

generating penetrating radiation used in connection with this product. The use of such material or 

generators in any manner other than prescribed in the U.S. Nuclear Regulatory Commission or 

equivalent Agreement State or permitted by any regulation of the U.S. Nuclear Regulatory Commission 

or State Regulation may constitute a violation of such license terms. 

All other warranties, except those warranties expressly stated herein, including without limitation 

warranties of, merchantability and implied warranties of fitness, are expressly excluded. 

The warranty on this container is specifically limited to its use only with sealed sources and connectors, 

parts, and accessories manufactured by QSA Global, Inc. 

Sentinel

TM

, QSA Global, Inc. shall not be liable for any errors or omissions contained herein and the 

provision by Sentinel

TM

, QSA Global, Inc. of the information set out in this manual does not in itself 

constitute acceptance of any liability on the part of Sentinel

TM

, QSA Global, Inc. 

 

 

 

ii

 

Summary of Contents for Sentinel SSC-2














Reviews: