Q
RS PNO
3
User Guide
QRS Music Technologies, Inc.
Technical Support - 800-247-6557
www.qrsmusic.com
Routing & Delay Settings
For setting up the Mixed Audio Out, MIDI Out Settings, MIDI Out Adjust, and Aux Input
There are four analog ports—similar to the kind you see on your headphones. Port 1 and Port 4 are routed
to the Pin Light Port Extender, Port 1 is for your Microphone Input, and Port 4 is for use with headphones.
The setup page allows you to designate if you would like the audio output to include a Piano Sound
created by a Sound Module to replicate what the piano is playing as a solo or mixed with background
music.
Piping the music through your home without a Mic and Mixer:
Set Upper Right to On
and send that
output to the customers home speaker.
The
lower left is off
by default, sending only background music to the speaker under the piano.
If the piano is setup with PNOscan and has a Key Stop rail
Lower Right Port 4 output set to on
will allow
you to practice in silence.
Synth Delay is used when the system is set up as an upgrade to a third party player system or there are
some delay issues when sending through another audio system.
35
