GETTING STA RT E D !
Before you start using your Que! M3 Drive, you’ll want to make sure you have everything you
need. In this chapter, we’ll tell you what comes in the package, so you can make sure it’s all
there. As well, in this chapter we’ll tell you about the minimum requirements your system
needs to support the Que! M3 Drive.
What You Should Have!
Refer to the provided package list on page 2 and verify that you have received all of the
appropriate parts. If all the right parts are in the package, then you just need to make sure
your system will support the Que! M3 Drive. Here’s what you’ll need:
• Pentium 333MHz processor or better
• MS Windows 98 SE, Windows ME or Windows 2000*
• 64MB RAM
• Built-in USB 2.0 ports or add-on USB 2.0 Host Controller Card*
• CD-ROM drive for soft ware installed
• 100MB free hard disk space
* Hi-Speed USB 2.0 support drivers must be supplied by your System manufacturer, if your
USB 2.0 ports are on board or your USB 2.0 Host Controller Card manufacturer, if you have an
add-in card.
Note: Please refer to Que! M3 Installation Manual CD for complete installation version.
4
GETTING STA RT E D
Que M3 manual 8/23/01 7:03 PM Page 6
