Quick Install Guide
Check for Packing List
1. One Wireless G BroadBand Router
2. One Power Adapter
3. One Ethernet Network Cable
4.One Set -up CD-ROM with User ’s
Manual
5. One Quick Installation Guide
1
Before you begin, ensure
that the Wireless Router, the
DSL/Cable modem supplied by your IP Provider, and PC
2
Connect an Ethernet cable to one of the
ports
on the back of the Wireless Router to the Ethernet
3
Connect your DSL/Cable Modem to the Internet
port
on the Wireless
R outer using a standard
RJ-45
4
Turn on the DSL/Cable
modem first.
5
Then turn on your wireless
router .
6
Check the LEDs:
7
Turn on your PC.
Notes
Restart your computer
..
8
For Windows 2000 & XP users, your computer should
obtain an IP Address automatically from the Wireless
Router's DHCP Server, after you've done the above
steps and restarted
your computer
For W indows 2000 & XP
For Windows 98 / ME / Macintosh
Please refer to the User's Guide found on the CD.
ARM914
To PCs
ADSL/Cable
Modem
Existing Connection
Subscribed line
Power
To Internet
QP-WR254G
802.11 b/g Wireless Router
1
Aplication Diagram
Connect the 802.11g Wireless Router
2
Router Configuration (for Internet Access)
2
www.qpcom.com
Before setting up the Wireless Router, make sure your Pcs are
configured to “obtain an IP or (TCP/IP) address
automatically”.
Click start
click Control Panel
Network and
Internet connections
(Right- click on) Local area
Connection
Properties
Make sure the box next to Internet Protocol (TCP/IP) is checked.
Click the Internet Protocol (TCP/IP) and
Select “Obtain an IP address automatically”.
Select “Obtain DNS server address automatically”.
Then click OK to complete the PC configuration.
The Power, Internet and W LAN LEDs should be ON
For each active LAN (PC) connection, the LAN
LAN
