2
IN THE BOX
QUANTITY
ITEM
DESCRIPTION
12
RTLS units
Each RTLS unit contains a DWM1001-
DEV development board with a
DWM1001C
Each RTLS unit can be configured as an
anchor, a tag, a listener or a bridge node
(allowing to create gateways)
1
1 m USB cable
For re-programming the RTLS unit with
new / different firmware
4
8
Right-angled USB connector
Adhesive Pads
Options for powering & mounting RTLS
units configured to act as anchors
1
Quick start guide
Read this first!
ON DECAWAVE’S WEBSITE (www.decawave.com)
Decawave DRTLS Manager
Android application file (.apk) for configuration
and visualisation
Download and install on your Android
6.0 or 7.0 phone/tablet.
Documentation for:
MDEK1001 evaluation kit
DWM1001-DEV development board
DWM1001C module
Including:
MDEK1001 System User Manual
Firmware & API Guides
Hardware datasheets
ALSO REQUIRED (NOT INCLUDED)
Power sources for
the RTLS units
RTLS units can be powered via USB mains power supplies
or batteries inside the enclosures
It is recommended to power anchors by USB mains-powered
power supplies or high capacity USB battery packs
Battery: 3.7V RCR123a or 16340 rechargeable
Note: Some USB battery packs shutdown when connected to
the low-current tags. Battery packs with a torch function often
stay on when the tag sleeps
Android Device
Smartphone or Tablet running Android 6.0 or 7.0 e.g.
Samsung Galaxy Tab S2
Tripods / Stands /
Sticky Tape
Use tall tripods or wall mountings to mount the anchors high
above tags to reduce non-line-of-sight conditions
PC
Optional:
Used to directly connect a PC to an RTLS unit to log location
data or send commands to that unit
