Connect the visuali
s
er to a computer with a RS232 cable (Please disconnect
the projector from the RS232 port first) and select the Baud Rate and Parity
based on the projector’s Baud Rate, then click the “TEST” button to pop up
the Projector Code Test dialog box, input the Baud Rate and Parity based on
the projector’s Baud rate, then click “Open”.
Click the projector control buttons on the visualizer’s operating panel to check
if the control code that the program received is the same as the sending code.
If the receiving code is same to the sending code, the input codes are correct.
If the visuali
s
er can not control the projector, please do the following.
1. Check to see if the source control codes of projector are correct.
2. Check to make sure the connection between the visuali
s
er and the
projector is correct.
SPECIFICATIONS
Resolution
SXGA (1280 x 1024),XGA (1024 x 768)
Total Pixels
2,000,000
Lens
12 x optical zoom, 10 x electrical zoom
Camera Rotation
Vertically 330°,
Motorized Camera Head
Yes
16
