visuali
s
er before your computer is restarted.
USB PORT
The USB port can be used to store still images from the visuali
s
er in a
computer. Connect the visuali
s
er to your computer with the supplied USB
cable. The visuali
s
er software is available on the supplied CD-ROM.
* Please pay attention to the following:
1. Computer hardware requirement: CPU: 2.4GHz, RAM: 256M or above,
Graphic card 64M, USB 2.0 port, Hard disk 40G or more, Monitor display
resolution higher than XGA (1024*768).
2. Operating system: Windows XP SP2 (Service Pack 2).
3. Must use a high-speed USB 2.0 cable provided
4. When connecting the visuali
s
er to a desktop computer with the high-
speed USB 2.0 cable provided, we recommend using the USB port
located on the rear of the mainframe. The USB port on the front of the
computer might have interference.
USB IMAGE CAPTURE
You can capture and control images on the visuali
s
er from a computer
connected with a USB connector.
Click [Start] -> [Program] -> [VideoCap] -> “VideoCapx.xx” (x.xx is software’s
version) to open the software.
A. Static Images Snap
Click “Capture”—>“Capture Frame”, input the file name in dialog box, or you
can click
icon on the toolbar, and then input file name in dialog window.
The image file is JPG format.
B. Snap Video Stream
Click
“Capture”—>
“Start Capture”, input the file name in dialog box, or click
icon on the toolbar, then input the file name in dialog box. If you want to set
the time limit for the capture, select “Capture” ->“Set Time Limit” to set the
time limit. Click “Start Capture” to start capture, and click “Stop Capture” or
icon on the toolbar to stop capture. (If you have set the time limit, it will stop
automatically when the time is up.) The video file is AVI format.
C. Set the Frame Rate
12
