10
Basic Operation
⚫
Device power on
After connecting the power source, please wait for the source indicator
to turn off, only the red light of the power button is on, and then press
the power button.
⚫
Working on the stage
Place your material on the platform.
Select the enlargement required using the
“zoom
in/zoom
out” knob.
Adjust the focus of
the “AUTO” button.
⚫
Working outside the stage
To show a 3-dimensional object using the visualizer, place the object
on the working surface and adjust the “zoom
i
n/out”
and “AUTO” keys. If
the object is too large for the stage or if you would like to show it from
one of its sides, or a different angle, just place the object behind or in
front of the unit and manually tilt the camera head (remove the close-
up lens before titling the camera head).
Rotate 330 degrees vertically
⚫
Light
The arm lights are powered on when the power is turned on. Each time
you press the “LAMP” button, the lighting
changes occur as
demonstrated.
The arm lights turn on
The backlight turns on
All the lights turn off
