QOLSYS IQ PANEL 2, Installation Manual

Page: 36 / 57

PROGRAMMING
INSTALLER/DEALER SETTINGS
Setting Default Description
Jam Detection Local Alarm*
Note: Not evaluated by UL/cUL
Disabled
When enabled the system will sound a local alarm. “Jam Detection” must be active for
this to function properly
RF Jam Sensitvity Level* Normal Choose between HIGH and NORMAL sensitivity levels
Allow Master Code to Access
Security Sensors
Disabled
Allow the Master Code to access to the Security Sensor icon, including Auto Learn
Sensor, Add Sensor, Edit Sensor, Delete Sensor, Sensor Status & Sensor Group
Open/Close Reports Allowed For
Auto Learn
Enabled
Rather than sending a tamper to auto learn a sensor, enabling this will allow an open/
close of the sensor to trigger auto learn
Panel Glass Break Detector Disabled
Creates an independent zone that leverages the panel’s built-in microphones to act as a
glass break detector. This will fall into the zone order at the time you enable this feature
Delete All Sensors Deletes all security sensors and Bluetooth devices programmed in the panel
Delete All Z-Wave Devices Deletes all Z-Wave devices programmed in the panel. This does not clear the device
Master Reset* Restores panel to factory settings and erases all content
Data Recycle This feature erases all User data previously stored
Reset Panel With Last Back-up
Image*
Restores the panel to factory settings using the last known good software image