3.
CONTROL BUTTONS STOP WORKING (BUT SCREEN IS LIGHTING UP):
The screen on your control panel is called the fascia. Underneath the fascia is the main
Circuit (IC) Board. When you press the buttons on your fascia, you are making a
connection with the IC Board and sending a command to the controller. Overtime these
buttons may require you to press extra hard to make a connection or may start working
intermittently. The connection between these buttons can become dry, but with a bit of
WD-40 or similar lubrication, they will be back to working as expected.
o
Using a small razor blade or similar tool, slide it underneath the bottom right
corner of the fascia and pry away from handle to expose the buttons underneath.
o
Using WD-40 or a similar lubricant (the narrow straw that usually comes with these
lubricants makes this much easier), place a small drop on the Pause/Play button or
the (+) and (-) buttons as needed. This will re lubricate the connection between the
fascia and IC Board.
o
After placing a drop of lubricant on the desired button, let the fascia board fall back
into place and gently apply pressure to the corner to re-adhere the fascia.
o
Plug your battery in and test the functionality of the buttons.
o
If you have completed this step and feel the adhesive is no longer adhering the
fascia to the T handle, we can always send you a replacement fascia board which
will have 3M peel and stick adhesive
Summary of Contents for ELECTRIC GOLF CADDY 2018
Page 1: ...2018 QOD OPERATING MANUAL...
