o
Umbrella Holder
QODGOLFUSA.COM/UMBRELLA
o
Tools: Phillips Screwdriver, 10mm socket (OR pliers/wrench).
o
Remove screw from top of accessory bracket on handle bar, then remove second
screw above it. You no longer need these.
o
Look through the holes to make sure the cable is not blocking the holes. If it is, use a
tee to move the cable to one side.
o
Remove the two screws inserted in the umbrella holder bracket. You will use these
again in the last step.
o
Lock the umbrella holder in an upright position. While standing behind the caddy,
slide the umbrella holder from left to right over the two empty holes. It is a tight fit.
o
Insert stainless screw through the top hole and insert other screw from the bottom.
Then tighten both.
o
Storage Pouch
Summary of Contents for ELECTRIC GOLF CADDY 2018
Page 1: ...2018 QOD OPERATING MANUAL...
