3.7 QoS
Quality of Service (QoS) features are used to prioritize the use of bandwidth in a switch. When QoS
features are enabled, traffic is classified as it arrives at the switch, and processed through on the
basis of configured priorities.
3.7.1 Port-Based QoS
LABEL
DESCRIPTION
Scheduler Method
Select WFQ(Weighted Fair Queuing) or Strict Priority
Port
Queue ID to configure for each port
Weight
If the queue type is WFQ, set the queue weight for the queue.
Apply
Click
Apply
to save your changes to the switch.
Summary of Contents for QMP1005G
Page 1: ...5 Port Gigabit Management PoE switch User Manual...
Page 2: ...Default IP 192 168 2 1 Username Password admin...
Page 14: ...3 4 2 Port Based VLAN Click Add VLAN and it will show as below Select the VLAN member port...
Page 23: ...3 12 Password In Password page you can change user name and password for security...
