manualshive.com logo in svg

QNAP TVS-h 88X Series, User Manual, Page: 54 / 88

Share
Download
QNAP TVS-h 88X Series User Manual Download Page 54

10.

Connect all cables and external attachments.

11.

Connect the power cord to the electrical outlet.

12.

Power on the device.

Installing Expansion Units

The device supports SATA JBOD expansion units and USB expansion units. For details, please see table
below.

You can purchase storage expansion accessories from QNAP or an authorized reseller.

For details, go to 

https://shop.qnap.com/

.

For the list of compatible expansion units and the maximum number of applicable expansion units, go to

http://www.qnap.com/go/compatibility-expansion

.

Expansion Unit Model

Description

Required Accessories

TL-D400S

• Uses a SAS 6 Gbps

(SFF-8088) interface

• Supports SATA/HDD/SSD

• 1 x SFF-8088 connector cable

• QXP-400eS-A1164 host bus

adapter

TL-D800S

• Uses a SAS 6 Gbps

(SFF-8088) interface

• Supports SATA/HDD/SSD

• 2 x SFF-8088 connector

cables

• QXP-800eS-A1164 host bus

adapter

TL-D1600S

• Uses a SAS 6 Gbps

(SFF-8088) interface

• Supports SATA/HDD/SSD

• 4 x SFF-8088 to SFF-8644

connector cables

• QXP-1600eS host bus adapter

TVS-hx88X User Guide

Installation and Configuration   

53

Summary of Contents for TVS-h 88X Series

























































































Reviews:

No comments