manualshive.com logo in svg

QNAP Turbo Station TS-1273AU-RP, User Manual, Page: 48 / 69

Share
Download
QNAP Turbo Station TS-1273AU-RP User Manual Download Page 48

LED

Status

Description

2.5 Gigabit
Ethernet
activity

Orange

A network connection has been established.

Flashes orange

The device is being accessed from the network.

Off

There is no network connection.

Drive

Flashes red

The data is being accessed and a read/write error occurs
during the process.

Red

• A drive read/write error occurred.

• The drive temperature is over the threshold.

Flashes green

• Data is being accessed.

• Data is being copied.

Green

• The drive can be accessed.

• The device is powered on.

Off

No drive was detected.

Expansion
Unit

Blue

A QNAP expansion unit is connected.

Off

No USB or SATA external storage devices connected.

Audio Alert

Duration

Frequency

Description

Short beep (0.5 seconds) 1

• The NAS is starting up.

• When the reset button is pressed for 3 seconds,

the NAS resets configurations.

• When the reset button is pressed for 10

seconds, the NAS resets configurations and
reboots.

• The operating system was updated.

3

Cannot detect installed disk.

TS-x73AU User Guide

Basic Operations   

47

Summary of Contents for Turbo Station TS-1273AU-RP






































































Reviews:

No comments