7.
Press Ctrl+Alt+Del to enter the command line.
8.
Input the following command:
# sudo su
# fdisk –l
9.
The following result will be shown.
/dev/sda
is your flash drive;
/dev/sdb
, about 128MB or 512MB, is the DOM to be
re-flashed.
10.
Input the following command:
# mkdir usbdrive
# mount /dev/sda1 /home/dsl/usbdrive
# cd /home/dsl/usbdrive
11.
Input the following command:
# cp dom.img /dev/sdb
“dom.img” is the firmware name; /dev/sdb is the drive name of the DOM.
12.
Reboot your NAS with the command:
# reboot
13.
Connect the NAS to your switch or router and use the QNAP Finder to find the NAS. If
the NAS can be connected, you may turn off the NAS, install the hard drives and turn
34