8.
Connect all cables and external attachments.
9.
Power on the device.
10.
Verify that the module is recognized by the device.
a.
Log on to QuTS hero as administrator.
b.
Go to
Control Panel
>
System
>
System Status
>
Hardware Information
.
c.
Check the value for
Total memory
.
Replacing Memory Modules on the TS-h1277XU-RP, TS-h1677XU-RP, and TS-h2477XU-RP
Important
QNAP recommends installing modules in pairs to run dual-channel mode.
• Ensure that each memory channel uses identical modules. See table below for details:
Channel name
Slot numbering
Channel A
Slots 1, 2
Channel B
Slots 3, 4
• When installing one module use the slot furthest from the CPU (slot 4).
• Install the pairs in sequence and follow the assigned slots for each pair.
• Install memory modules in groups of two or four. When installing two memory modules,
install the memory in memory slots 2 and 4. When installing four modules, install the
memory in slots 2,4 and then slots 1, and 3.
For details on slot numbering, see
Warning
TS-hx77XU-RP User Guide
Installation and Configuration
30