manualshive.com logo in svg

QNAP TS-h77XU-RP Series, User Manual

Share
Download
QNAP TS-h77XU-RP Series User Manual Download Page 21

3. Installation and Configuration

This chapter provides specific hardware and firmware installation and configuration steps.

Hardware Installation

This section provides information on installing drives, memory modules, and expansion cards.

Drive Installation

The TS-hx77XU-RP is compatible with 3.5-inch hard drives, 2.5-inch hard drives, and 2.5-inch solid-state
drives.

Installing 3.5-inch Hard Drives on 3.5-inch Trays

Warning

• Installing a drive and installing QuTS hero deletes all data on the drive.

•

Moving fan blades:

 Keep your hands and other body parts away from moving fan

blades.

•

Other moving components:

 Keep your hands and other body parts away from other

moving components.

1.

Power off the NAS.

2.

Remove the drive tray.

a.

Pull the handle to release the tray.

b.

Pull the tray out.

TS-hx77XU-RP User Guide

Installation and Configuration   

20

Summary of Contents for TS-h77XU-RP Series












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands