2. Installation and Configuration
This chapter provides specific hardware and firmware installation and configuration steps.
Hardware Installation
This section provides information on installing or replacing drives, memory modules, expansion cards,
redundant power supply units, system fans, rail kits, and expansion units.
Drive Installation
The TS-h3087XU-RP is compatible with 3.5-inch hard drives and 2.5-inch solid-state drives.
Installing 3.5-inch Drives on 3.5-inch Trays
For the list of compatible drive models, go to
https://www.qnap.com/compatibility
Warning
• Installing a drive deletes all data on the drive.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
1. Power off the NAS.
2. Remove the drive tray.
a. Slide the lock to the left.
b. Push the button to release the tray handle.
c. Pull the tray out.
TS-h3087XU-RP User Guide
Installation and Configuration
13