Installation methods
Steps
Manual installation
a.
Click
Manual Installation
.
The
Install Firmware
window appears.
b.
Click
Browse
.
The upload file window appears.
c.
Select file.
d.
Click
Open
.
Starts firmware installation.
Skip
a.
Click
Skip
.
Skips firmware installation.
7.
Specify the following information
•
NAS name
: Specify a name with 1 to 14 characters. The name supports letters (A to Z, a to z),
numbers (0 to 9), and hyphens (-), but cannot end with a hyphen.
•
Password
: Specify an administrator password with 1 to 64 characters. The password supports all
ASCII characters.
8.
Click
Next
.
9.
Specify the time zone, date, and time.
Tip
QNAP recommends connecting to an NTP server to ensure that the NAS follows the
Coordinated Universal Time (UTC) standard.
10.
Click
Next
.
The
Configure the network settings
screen appears.
11.
Select
Obtain an IP address automatically (DHCP)
.
12.
Click
Next
.
The
Cross-platform file transfer service
screen appears.
13.
Select the types of devices that you will use to access shared folders on the NAS.
14.
Click
Next
.
15.
Review the settings.
16.
Click
Apply
.
A confirmation message appears.
Warning
Clicking
Yes
deletes all data on the drive before installing QuTS hero.
17.
Click
Yes
.
• The
QuTS hero
installation progress bar appears.
•
QuTS hero
is installed.
Note
It may take a couple of minutes to complete QuTS hero installation.
TS-h1886XU-RP User Guide
Installation and Configuration
36
