background image

You may convey verbatim copies of the Program's source code as you receive it, in any medium,

provided that you conspicuously and appropriately publish on each copy an appropriate copyright

notice; keep intact all notices stating that this License and any non-permissive terms added in accord

with section 7 apply to the code; keep intact all notices of the absence of any warranty; and give all

recipients a copy of this License along with the Program.

You may charge any price or no price for each copy that you convey, and you may offer support or

warranty protection for a fee.

6. Conveying Modified Source Versions.

You may convey a work based on the Program, or the modifications to produce it from the Program,

in the form of source code under the terms of section 4, provided that you also meet all of these

conditions:

a. The work must carry prominent notices stating that you modified it, and giving a relevant date.

b. The work must carry prominent notices stating that it is released under this License and any

conditions added under section 7. This requirement modifies the requirement in section 4 to

“keep intact all notices”.

c. You must license the entire work, as a whole, under this License to anyone who comes into

possession of a copy. This License will therefore apply, along with any applicable section 7

additional terms, to the whole of the work, and all its parts, regardless of how they are packaged.

This License gives no permission to license the work in any other way, but it does not invalidate

such permission if you have separately received it.

d. If the work has interactive user interfaces, each must display Appropriate Legal Notices; however,

if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work

need not make them do so.

A compilation of a covered work with other separate and independent works, which are not by

their nature extensions of the covered work, and which are not combined with it such as to form

a larger program, in or on a volume of a storage or distribution medium, is called an “aggregate”

if the compilation and its resulting copyright are not used to limit the access or legal rights of the

compilation's users beyond what the individual works permit. Inclusion of a covered work in an

aggregate does not cause this License to apply to the other parts of the aggregate.

7. Conveying Non-Source Forms.

You may convey a covered work in object code form under the terms of sections 4 and 5, provided that

you also convey the machine-readable Corresponding Source under the terms of this License, in one of

these ways:

a. Convey the object code in, or embodied in, a physical product (including a physical distribution

medium), accompanied by the Corresponding Source fixed on a durable physical medium

customarily used for software interchange.

b. Convey the object code in, or embodied in, a physical product (including a physical distribution

medium), accompanied by a written offer, valid for at least three years and valid for as long

as you offer spare parts or customer support for that product model, to give anyone who

possesses the object code either (1) a copy of the Corresponding Source for all the software in

the product that is covered by this License, on a durable physical medium customarily used for

software interchange, for a price no more than your reasonable cost of physically performing this

conveying of source, or (2) access to copy the Corresponding Source from a network server at no

charge.

c. Convey individual copies of the object code with a copy of the written offer to provide the

Corresponding Source. This alternative is allowed only occasionally and noncommercially, and

only if you received the object code with such an offer, in accord with subsection 6b.

d. Convey the object code by offering access from a designated place (gratis or for a charge), and

offer equivalent access to the Corresponding Source in the same way through the same place

TS-h1886XU-RP User Guide

Notices   

54

Summary of Contents for TS-h1886XU-RP-R2































































Reviews: