9.
Click
Start Smart Installation Guide
.
The
Enter the NAS name and administator's password
screen appears.
10.
Specify the following information.
•
NAS name
: Specify a name with 1 to 14 characters. The name supports letters (A to Z, a to z),
numbers (0 to 9), and hyphens (-), but cannot end with a hyphen.
•
Password
: Specify an administrator password with 1 to 64 characters. The password supports all
ASCII characters.
11.
Click
Next
.
The
Set the date and time
screen appears.
12.
Specify the time zone, date, and time.
Tip
QNAP recommends connecting to an NTP server to ensure that the NAS follows the
Coordinated Universal Time (UTC) standard.
13.
Click
Next
.
The
Configure the network settings
screen appears.
14.
Select
Obtain an IP address automatically (DHCP)
.
15.
Click
Next
.
The
Cross-platform file transfer service
screen appears.
16.
Select the types of devices that you will use to access shared folders on the NAS.
17.
Click
Next
.
The
Select the disk configuration
screen appears.
18.
Select
Configure disks later
.
For details on configuring disks, see the Storage Manager section of the QTS User Guide.
19.
Click
Next
.
The
Enable multimedia functions
screen appears.
20.
Select
No
.
Enabling the multimedia functions allows you to install multimedia applications after configuring the
disks in Storage Manager.
For details on enabling multimedia functions on QTS, see the System Administration section of the
QTS User Guide.
21.
Click
Next
.
The
Summary
screen appears.
22.
Review the settings.
23.
Click
Apply
.
A confirmation message appears.
Warning
Clicking
Confirm
deletes all data on the drive before installing QTS.
24.
Click
Confirm
.
QTS is installed.
TS-x53B User Guide
Installation and Configuration
36
