2. Power on the expansion units.
3. Verify that the expansion units are recognized by the NAS.
a. Log on to QTS as administrator.
b. Go to Main Menu > Storage & Snapshots > Overview > System .
c. Verify that the expansion units are listed.
Connecting SATA JBOD Expansion Units
To connect the TS-x64U to SATA JBOD expansion units, a host bus adapter must be installed on the NAS.
For required accessories details, see
.
1. Power off the NAS.
2. Install a host bus adapter on the PCIe slot.
Installing Expansion Cards on the TS-464U and TS-464U-RP
and
Important
The QNAP QXP host bus adapter is required for connecting the SATA JBOD enclosure to a host
device. Third-party host bus adapters are not compatible with QNAP JBOD enclosures.
3. Connect the expansion units to the NAS using the following topology.
Note
This image shows connecting the TS-1264U-RP-4G to the TL-R400S JBOD enclosure.
TS-x64U User Guide
Installation and Configuration
36
